AAI ORIGINAL English Verison N1201SA N1201SA+ 34.375MHz-2.7GHz UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester
62
ធានាសុវត្ថិភាពពេលពិនិត្យចេញ

ធាតុត្រឡប់មកវិញនឹងត្រូវបានទទួលយកក្នុងរយៈពេល 40 ថ្ងៃនៅពេលដែលជាកាលបរិច្ឆេទនៃការទទួលទំនិញ។ ធាតុដែលបានប្ដូរតាមចំណូលចិត្តមិនអាចត្រឡប់មកវិញ ឬផ្លាស់ប្តូរបានទេ។ ធាតុដែលបានទិញជាមួយកាតអំណោយអេឡិចត្រូនិចអាចផ្លាស់ប្តូរបានតែប៉ុណ្ណោះ; ការបង្វិលប្រាក់មិនអាចអនុវត្តបានទេ។
អំណោយឥតគិតថ្លៃ
សូមស្វាគមន៍មកកាន់ Roymall គេហទំព័រវិជ្ជាជីវៈរបស់អ្នកសម្រាប់ការទិញអំណោយហាងផ្នែកដ៏ឧត្តុង្គឧត្តម។ យើងពិតជាឲ្យតម្លៃ និងថ្លែងអំណរគុណចំពោះការគាំទ្ររបស់អ្នក ហើយយើងចង់បង្ហាញពីការអរគុណរបស់យើងដោយបន្ថែមភាពរំភើបបន្ថែមទៅការទិញរបស់អ្នក។ នៅពេលអ្នកទិញជាមួយយើង អ្នកមិនត្រឹមតែរីករាយជាមួយនឹងផលិតផលដែលមានគុណភាពខ្ពស់ដែលធ្វើឱ្យជីវិតរបស់អ្នកប្រសើរឡើងប៉ុណ្ណោះទេ ប៉ុន្តែអ្នកក៏នឹងទទួលបានអំណោយឥតគិតថ្លៃដែលមានតែមួយគត់ជាមួយនឹងគ្រប់ការបញ្ជាទិញរបស់អ្នក។ ត្រៀមខ្លួនរួចរាល់ដើម្បីស្វែងយល់ពីការប្រមូលរបស់យើង និងស្វែងរកអំណោយដ៏ល្អឥតខ្ចោះរបស់អ្នក? រាវរកការជ្រើសរើសផលិតផលហាងផ្នែកដ៏ឧត្តុង្គឧត្តមរបស់យើង ដាក់ការបញ្ជាទិញរបស់អ្នក និងរង់ចាំភាពរំភើបនៃអំណោយឥតគិតថ្លៃរបស់អ្នកដែលមកជាមួយនឹងការទិញរបស់អ្នក។គោលការណ៍ដឹកជញ្ជូន
យើងនឹងខិតខំប្រឹងប្រែងដើម្បីដឹកជញ្ជូនធាតុទៅអ្នកបន្ទាប់ពីទទួលបានការបញ្ជាទិញរបស់អ្នក និងធានាថាពួកគេមកដល់ដោយសុវត្ថិភាព។ ព័ត៌មានលម្អិតអំពីការដឹកជញ្ជូននឹងត្រូវបានផ្តល់ឱ្យក្នុងអ៊ីមែលបញ្ជាក់របស់អ្នក។ក្នុងករណីភាគច្រើន ការបញ្ជាទិញត្រូវបានដំណើរការក្នុងរយៈពេល 2 ថ្ងៃ។ក្រោមស្ថានភាពពិសេស វានឹងត្រូវពន្យារពេលដូចខាងក្រោម៖ នៅពេលអ្នកដាក់ការបញ្ជាទិញនៅថ្ងៃសៅរ៍ ថ្ងៃអាទិត្យ ឬថ្ងៃឈប់សម្រាកសាធារណៈ វានឹងត្រូវពន្យារពេល 2 ថ្ងៃ។ជាធម្មតា វាត្រូវការពេលវេលា 5-7 ថ្ងៃធ្វើការ (ច័ន្ទដល់សុក្រ) ដោយមិនរងផលប៉ះពាល់ពីការពន្យារពេលជើងហោះហើរ ឬកត្តាបរិស្ថានផ្សេងទៀត។ដោយសារសេវាកម្មដឹកជញ្ជូនរបស់យើងគឺជាសកល ហេតុនេះពេលវេលាដឹកជញ្ជូននឹងអាស្រ័យលើទីតាំងរបស់អ្នក ដូច្នេះវាអាចត្រូវការពេលវេលាមួយចំនួន ហើយសូមរង់ចាំដោយសេចក្តីអត់ធ្មត់ ប្រសិនបើអ្នកស្ថិតនៅក្នុងស្រុក ឬប្រទេសដាច់ស្រយាល។1. គោលការណ៍ត្រឡប់មកវិញ & ផ្លាស់ប្តូរ
យើងទទួលយកតែធាតុដែលបានទិញពី roymall.com។ ប្រសិនបើអ្នកទិញពីអ្នកចែកចាយក្នុងស្រុករបស់យើង ឬអ្នកលក់រាយផ្សេងទៀត អ្នកមិនអាចត្រឡប់វាមកយើងវិញបានទេ។ ធាតុលក់ចុងក្រោយ ឬអំណោយឥតគិតថ្លៃមិនអាចទទួលយកសម្រាប់ការត្រឡប់មកវិញបានទេ។ដើម្បីមានសិទ្ធិទទួលបានការត្រឡប់មកវិញ ធាតុរបស់អ្នកត្រូវតែមិនបានប្រើប្រាស់ ហើយនៅក្នុងស្ថានភាពដូចគ្នានឹងពេលអ្នកទទួលបានវា។ វាត្រូវតែនៅក្នុងកញ្ចប់ដើមផងដែរ។បន្ទាប់ពីទទួលបានការណែនាំអំពីការត្រឡប់មកវិញពីយើង សូមវេចខ្ចប់ធាតុដែលអ្នកបានត្រឡប់មកវិញ ហើយទម្លាក់កញ្ចប់របស់អ្នកនៅក្នុងការិយាល័យប្រៃសណីយ៍ក្នុងស្រុក ឬអ្នកដឹកជញ្ជូនផ្សេងទៀត។យើងនឹងដំណើរការធាតុត្រឡប់មកវិញ ឬផ្លាស់ប្តូររបស់អ្នកក្នុងរយៈពេល 3-5 ថ្ងៃធ្វើការបន្ទាប់ពីយើងទទួលបានវា។ ការបង្វិលសាច់ប្រាក់នឹងត្រូវបានដំណើរការ និងផ្ទេរទៅក្នុងវិធីសាច់ប្រាក់ដើមរបស់អ្នកដោយស្វ័យប្រវត្តិ។មិនអាចទទួលយកការត្រឡប់មកវិញ ឬផ្លាស់ប្តូរបានទេ ប្រសិនបើផលិតផលត្រូវបានផលិតតាមការកំណត់ រួមទាំងទំហំតាមការកំណត់ ពណ៌តាមការកំណត់ ឬបោះពុម្ពតាមការកំណត់។ត្រូវការជំនួយបន្ថែម សូមទាក់ទងមកយើងខ្ញុំ។ service@roymall.com ឬ Whatsapp: +8619359849471
2. គោលការណ៍បង្វិលសាច់ប្រាក់
អ្នកនឹងទទួលបានការបង្វិលសាច់ប្រាក់ពេញលេញ ឬ 100% ឥណទានហាងបន្ទាប់ពីយើងទទួលបាន និងពិនិត្យមើលកញ្ចប់ដែលបានត្រឡប់មកវិញ។ ការបង្វិលសាច់ប្រាក់នឹងត្រូវបានដំណើរការ និងផ្ទេរទៅក្នុងវិធីសាច់ប្រាក់ដើមរបស់អ្នកដោយស្វ័យប្រវត្តិ។សូមចំណាំថាថ្លៃដឹកជញ្ជូន និងការបង់ប្រាក់ឬថ្លៃសេវាណាមួយមិនអាចបង្វិលបានទេ។ ថ្លៃដឹកជញ្ជូនបន្ថែមមិនអាចបង្វិលបានទេ នៅពេលដែលកញ្ចប់ត្រូវបានដឹកជញ្ជូន។ អ្នកគឺជាអ្នកទទួលខុសត្រូវក្នុងការបង់ថ្លៃសេវាទាំងនេះ ហើយយើងមិនអាចលើកលែង ឬបង្វិលវាបានទេ ទោះបីជាការបញ្ជាទិញត្រូវបានត្រឡប់មកយើងវិញក៏ដោយ។នៅពេលដែលយើងបានទទួល និងបញ្ជាក់អំពីធាតុដែលបានត្រឡប់មកវិញរបស់អ្នក យើងនឹងផ្ញើអ៊ីមែលមួយទៅអ្នក ដើម្បីជូនដំណឹងថា យើងបានទទួលធាតុដែលបានត្រឡប់មកវិញរបស់អ្នក។ យើងក៏នឹងជូនដំណឹងដល់អ្នកអំពីការអនុម័ត ឬការបដិសេធនៃការបង្វិលសាច់ប្រាក់របស់អ្នកផងដែរ។ប្រសិនបើអ្នកមានបញ្ហាណាមួយទាក់ទងនឹងដំណើរការបង្វិលសាច់ប្រាក់ សូមទាក់ទងមកយើងខ្ញុំ។ service@roymall.com ឬ Whatsapp: +8619359849471
Description:
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
Description:
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual